Compuprint X03 Betriebsanweisung PDF herunterladen (Seite 74)

100

101

Option Alternate Code NN

Horizontal

Density

(dots/in.)

Single-Density ESC K 0 60

Double-Density ESC L 1 120

High-Speed Double-Density * ESC Y 2 120

Quadruple-Density * ESC Z 3 240

CRT I NONE 4 80

Plotter (1:1) NONE 5 72

CRT II NONE 6 90

Double-Density Plotter NONE 7 144

Note: (*) Adjacent dots cannot be printed in this mode.

Initialize Printer (ESC @)

1B 40

This control resets all print related parameters to values previously saved and clears the buffer of printable

data.

Select n/72 Inch Line Spacing (ESC A)

1B 41 NN

This control sets a line spacing value for subsequent line feeds.

NN is a one-byte hexadecimal number that specifies the line spacing value of NN/72 inches.

The value of NN is 0 to 85. Following are example values for NN:

X'18' 3 LPI

X'12' 4 LPI

X'0C' 6 LPI

X'09' 8 LPI

X'08' 9 LPI

X'06' 12 LPI

Set Vertical Tabs (ESC B)

1B 42 N1 N2...00

This control sets the vertical stops. The maximum number of tab stops supported is 16. The settings are

not affected by subsequent changes in line spacing. The tab settings must be in ascending order (N1, N2,

etc.) with the 0 character indicating the end of the command. Values of N are 1 to 255. All settings are

stored in Channel 0. See “Select Vertical Tabs in Channels (ESC b)” on page 60. To clear the tab settings,

use ESC B 0.

54 Programmer Manual

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare

Compuprint X03 Betriebsanweisung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Compuprint X03