Compuprint 4247-L03 Programmer Manua Bedienungsanleitung PDF herunterladen (Seite 39)

The m

parameter controls both line spacing and character height. It has two parts: a high-order half-byte

of m

controls the line spacing and the low-order half-byte controls the character height.

Character Height Line Spacing

0 No Change No Change

1 Standard character height Line feeds unchanged

2 Double character height Line feeds unchanged

16 Character height unchanged Normal line feeds

17 Standard character height Normal line feeds

18 Double character height Normal line feeds

32 Character height unchanged Double line feeds

33 Standard character height Double line feeds

34 Double character height Double line feeds

The m

parameter specifies the character width. Only the low-order half-byte is significant in this mode

byte. The high-order half-byte is ignored.

Character Width Line Spacing

0 No change No change

1 Standard width character No change

2 Double width character No change

ESC[d

Set the print quality. (IBM 2391 + only)

ASCII Code ESC [ d 10n

Hexadecimal Value X'1B' X'5B' X'64' 01 00 n

Decimal Value 27 91 100 10n

This command sets the print quality to draft or LQ print.

n Types

0 No Change

From 64 to 127 Draft

From 128 to 254 Letter Quality

255 Initialization on NVRAM values

Chapter 2. EPSON/IBM Mode 23

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 203 204

Keine Kommentare

Compuprint 4247-L03 Programmer Manua Bedienungsanleitung Seite 39