Compuprint 4247-L03 Programmer Manua Bedienungsanleitung PDF herunterladen (Seite 96)

ESC\orST

String terminator.

ASCII Code ESC \ or ST

Hexadecimal Value X'1B' X'5C' (7-bit) or X'9C' (8-bit)

Decimal Value 27 92 (7-bit) or 156 (8-bit)

This command closes the other escape sequences including the operating system and dot graphics

commands.

ESC Q or PU1

Executes Selftest.

ASCII Code ESC Q or PU1

Hexadecimal Value X'1B' X'51' (7-bit) or X'91' (8-bit)

Decimal Value 27 81 (7-bit) or 145 (8-bit)

In serial interface, upon receipt of this command the printer transmits 1B 50 30 1B 5C.

ESC c

Resets to initial state (RIS).

ASCII Code ESC c

Hexadecimal Value X'1B' X'63'

Decimal Value 27 99

This command writes the printer parameters from the stored format assigned to the current path into the

current format.

ESC k

Prints test character (PTC).

ASCII Code ESC k

Hexadecimal Value X'1B' X'6B'

Decimal Value 27 107

This sequence causes one line of the print head test character to be printed.

ESC [ p

; ... p

Sets mode (SM).

ASCII Code ESC [ p

; ... p

Hexadecimal Value X'1B' X'5B' p

X'3B' ... p

X'68'

Decimal Value 27 91 p

59 ... p

104

This command sets a specific print mode according to the parameter value. If the first parameter (p

)is

preceded by a “>” symbol then all parameters are interpreted as proprietary defined parameters. If the “>”

character is not specified, all parameters are interpreted as ANSI defined parameters.

80 Programmer Manual

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 203 204

Keine Kommentare

Compuprint 4247-L03 Programmer Manua Bedienungsanleitung Seite 96