Compuprint MDP40B Programmer Manual Bedienungsanleitung PDF herunterladen (Seite 135)

B-28

DC4 DC4 ESC @

Re-initializes the printer. (Compuprint)

ASCII Code DC4 DC4 ESC @

Hexadecimal Value 14 14 1B 40

Decimal Value 20 20 27 64

This command resets the printer mode and clears the buffer of printable data.

DC4 DC4 ESC J

Sets amplification factor. (Compuprint)

ASCII Code DC4 DC4 ESC J

h v

Hexadecimal Value 14 14 1B 4A

h v

Decimal Value 20 20 27 74

h v

This command sets the required amplification factor to be applied to the current font.

It is the horizontal amplification factor, the value range is 1 to 4. It is applied

to the basic symbols.

It is the vertical amplification factor, the value range is 1 to 255.

0 values for either h and v parameters keep the related current amplification factor

unchanged.

The internally available symbol’s amplification algorithms support the following

character attributes, that may be selected by means of the available control sequences

within the currently active emulation: double width, double-height, emphasized,

double strike, subscript, superscript, italics, proportional, compressed.

Doublewide and double-high attributes must be lower than 2.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 288 289

Keine Kommentare

Compuprint MDP40B Programmer Manual Bedienungsanleitung Seite 135