Compuprint 10200 Programmer Manual Bedienungsanleitung PDF herunterladen (Seite 13)

Commands

ESC 5

Sets an automatic line feed after a carriage return. (IBM)

ASCII Code ESC 5

Hexadecimal Value 1B 35

Decimal Value 27 53

If n is equal to 1, this command sets an automatic line feed on receiving of a CR code. If n is

equal to 0, this command cancels the automatic line feed.

n Automatic line feed

0 Disabled

1 Enabled

ESC J

Advances paper n/180 inch. (EPSON and IBMXL24AGM)

Advances paper n/216 inch. (IBMXL24 and 2391)

ASCII Code ESC J

Hexadecimal Value 1B 4A

Decimal Value 27 74

Range 1 <

< 255

This is a terminator code; it therefore causes the current contents of the print buffer to be

printed out before performing a single line feed of n/180 or n/216 inch. This command is

cancelled after the line feed has been performed. The printing will restart after a line feed from

the column at which the command was sent.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 233 234

Keine Kommentare

Compuprint 10200 Programmer Manual Bedienungsanleitung Seite 13