Compuprint 10200 Programmer Manual Bedienungsanleitung PDF herunterladen (Seite 214)

Interfaces

210

Signal Name Pin N° Source Description

SELECT 13 PRINTER When high, this signal indicates that the printer is on-line. It is put to

low state in case of initialization or test and program mode. In IBM

Proprinter emulation in low condition this signal signals a off-line

request from the operator panel, paper jam, paper end or paper size

errors.

AUTOFEEDX

14 HOST Active low level signal. Indicates whether a LF is performed after a CR

or not.

GND 16 - Logical ground level (0V).

CHASSIS

GND

17 - Frame ground.

+ 5 VDC 18 PRINTER Is the DC voltage supplied by a component that limits the driven

capability up to 100 mA.

SIGNAL GND 19-30 - Signal ground.

INIT 31 HOST Active low level signal. Indicates, that the printer is initializing. The

BUSY signal is forced high.

ERROR 32 PRINTER When low, this signal indicates that the printer is off-line, there is an off-

line request from the operator panel, or the printer is in an error state

because of: paper jam, paper end or paper size error, engine error,

output bin full or cover open condition.

+5V 35 PRINTER Pulled up to signal.

SELECTIN 36 HOST Active low level signal. Enables the printer.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 233 234

Keine Kommentare

Compuprint 10200 Programmer Manual Bedienungsanleitung Seite 214